Alert: Notifications at reduced capacity during COVID-19 restrictions

We are operating at reduced capacity due to the COVID 19 alert level four requirements.

Please only call our 0800 number if someone is at serious risk of harm or has been seriously injured, become seriously ill, or died as a result of work.

For other notifications please complete our online forms at Notify WorkSafe.

Rigging refers to the use of mechanical load-shifting equipment and associated gear to move, place or secure a load. Lifting loads with rigging predominantly involves working and/or load traversing at height. Risks of workers falling, or suspended loads falling must be considered.

We have produced guidance on how to be safe when load-lifting with rigging.

Approved code of practice for load-lifting rigging

This code provides recommendations and procedures for safe practice while carrying out lifting with rigging.  It includes guidance for determining the appropriate loading methods, configurations and equipment for load-lifting in construction.

Note: As there may be some minor errors in the load charts for chain slings, we recommend that manufacturer charts are used.

PDF
ACOP: Load-lifting rigging (PDF 3.7 MB)

Inspection register template

PDF
Load-lifting rigging inspection register template (PDF 56 KB)

While this guidance has not been updated to reflect current work health and safety legislation (the Health and Safety at Work Act 2015 and regulations), it may still contain relevant information and practices to keep workers and others healthy and safe.

Please read this guidance in conjunction with all relevant industry standards that apply to you as a PCBU. This guidance will be progressively reviewed and either updated, replaced with other guidance, or revoked.