Alert: Notifications at reduced capacity during COVID-19 restrictions
We are operating at reduced capacity due to the COVID 19 alert level four requirements.
Please only call our 0800 number if someone is at serious risk of harm or has been seriously injured, become seriously ill, or died as a result of work.
For other notifications please complete our online forms at Notify WorkSafe.
Hazardous substances are part of everyday life in metal finishing businesses. They can be dangerous to your health when they’re not used correctly.
We have produced guidance on the safe handling of hazardous substances in the metal finishing industry.
Working safely with hazardous substances in the metal finishing industry
This guidance has been written for managers of electroplating and galvanizing workshops. It walks you through five steps to help you safely manage the hazardous substances you use at work.
While this guidance has not been updated to reflect current work health and safety legislation (the Health and Safety at Work Act 2015 and regulations), it may still contain relevant information and practices to keep workers and others healthy and safe.
Please read this guidance in conjunction with all relevant industry standards that apply to you as a PCBU. This guidance will be progressively reviewed and either updated, replaced with other guidance, or revoked.
Compliance certification requirements
Depending on the type and quantity of chemicals held at your site, you may require one or more of the following compliance certificates:
- location compliance certificate
- certified handler compliance certificate
- stationary container compliance certificate
If you are unsure about your compliance certification requirements, contact a compliance certifier for advice.
As a general rule, you should keep the quantities of hazardous substances stored on your site to a minimum. In this way the risks may be reduced and the need for compliance certification reduced.