Alert: Notifications at reduced capacity during COVID-19 restrictions

We are operating at reduced capacity due to the COVID 19 alert level four requirements.

Please only call our 0800 number if someone is at serious risk of harm or has been seriously injured, become seriously ill, or died as a result of work.

For other notifications please complete our online forms at Notify WorkSafe.

This is the Health and Safety at Work (Hazardous Substances—Above Ground Rotationally-Moulded Polyethylene Stationary Tanks) Safe Work Instrument 2017

In this safe work instrument—

  1. clauses 6(1), 7 to 12, 14 to 16, 19 and 21 set requirements for the design and construction of a tank for the purposes of regulation 17.6(1)(k) of the Regulations:
  2. clause 13 sets requirements for the design, construction, and installation of a liquid level indicator for the purposes of regulation 17.12(3) of the Regulations:
  3. clause 20 sets requirements for marking of a tank for the purposes of regulation 17.76(1)(b)(ii) of the Regulations:
  4. clauses 17, 18, 22, 23, and 26 set out additional requirements that apply to the testing of a tank and states which PCBUs are required to comply with those requirements for the purposes of regulation 17.105 of the Regulations:
  5. clause 6(2), and clauses 24 and 25 set out additional requirements that apply to the installation of a tank and state which PCBUs are required to comply with those requirements for the purposes of regulation 17.105 of the Regulations:
  6. clauses 27 to 29 set out additional requirements that apply to the operation of a tank and states which PCBUs are required to comply with those requirements for the purposes of regulation 17.105 of the Regulations:
  7. clause 30 sets out additional requirements that apply to the inspection of a tank and state which PCBUs are required to comply with those requirements for the purposes of regulation 17.105 of the Regulations:
  8. clause 31 specifies the maximum period of validity for which a compliance certificate for a tank may be issued for the purposes of regulation 17.92(1)(a)(i)(E) of the Regulations.
PDF
Above ground rotationally-moulded polyethylene stationary tanks (PDF 340 KB)